After unplugging and switching off your Gerni, you should do a quick check of the hose, spray gun, filter, lance, power cord, and fittings to check for any wear and tear.
After use, point the spray gun away from people or animals and run it until the water stops flowing. This is important as it releases all the built-up pressure on the fittings & O-rings, avoiding wear & tear on your Gerni.
It’s always a good idea to do a quick rinse off all your accessories to make sure there are no blockages or detergent build-up, so they are ready for your next Gerni session!
one of the most essential gerni hose stuff you want to study while shopping for a high-pressure water purifier is the length of the electric cord and the duration of the hose that connects the pump to the lance that shoots the water. The motive is that you want to be mobile and flow the purifier round so that you can easily get entry to the areas which you are cleaning. The longer the electrical twine that comes with the cleaner the better. using a protracted extension wire is not encouraged except you’ve got checked that the amperage of the wire is sufficient to deliver ok strength to the cleanser, in any other case, the motor of the purifier might be overloaded a good way to speedy lessen the existence of the high-pressure water purifier motor.
Maximum domestic excessive-stress water blasters along with gene or Karcher connect to standard hose fittings, so you are handiest constrained by way of the duration of your hose or electrical cord. if you want to clean at genuinely remote websites, you can use a generator. however, you’ll need a cleanser that attracts water from a tank. therefore, it’s far critical to bear in mind in advance whether or not you will want to smooth at locations where you cant connect with a tap.
Taking care of your Gerni ensures that it can continue to operate efficiently and perform at its best all year round – extending the life of your Gerni and saving money for any repair work.
You need to make sure you are looking after your Gerni Pressure washer properly so that it can continue to clean your home!
First, always make sure that your Gerni is turned off and disconnected from the power supply before cleaning or disassembling.
Subsequently, discover what sort of nozzles come with the water blaster. this is critical as specific nozzles are used for one-of-a-kind cleansing jobs. The unique nozzle shapes control the drift of water and the impact strain, that’s the force of the water hitting the item’s surface. as an example, if you need to pay attention to the strain to take away stubborn stains you need a small spherical nozzle known as a pencil nozzle. The fan nozzle is used to ease big areas speedy. The rotary nozzle is the maximum not unusual fashioned high-pressure water cleaner nozzle because it combines each pencil and fan nozzle. The rotary nozzle spins taking pictures out of high-pressure jets of water, so it’s miles high impact and cleans big regions fast.
For safety motives, high-pressure water cleaners ought to have a protection transfer that ought to be launched earlier than you may use them, and you must also usually maintain down the trigger for water to be discharged from the lance.
It’s a good idea to check your Gerni and accessories each month for blockages or any debris.
You might find that your Gerni is fluctuating pressure. This is likely to be because your nozzles are dirty or blocked – preventing a constant flow of pressure. The best thing to do is regularly check to see if you need to clean your nozzles. A cleaning needle is provided in your Gerni box to clean the filter or clear any blockages.
Cleaning your filter
Your Gerni High-Pressure water vacuum will have a filter, just like a vacuum cleaner filter. This will need cleaning to help your Gerni perform at its best!
in the end, you have to test water requirements. decide how plenty water the high-pressure water cleaner uses to make certain that it’s miles desirable on your requirements.
Step 1 – Removing the Inlet Filter
Detach the garden hose and unscrew the quick coupling fitting connected to the water inlet, carefully remove the inlet filter with a pair of long-nosed pliers.
Step 2 – Clean out the dirt
With the filter removed you can wash it under running water, making sure the filter is cleared of any dirt or debris.
Quick Tip: Use a spare toothbrush or the needle provided with the kit to remove more stubborn areas of dirt!
Step 3 – Refit the filter
Once all is cleaned, you can reverse the process to re-insert the inlet filter and put your Gerni back in storage ready to go!
Regular maintenance and cleaning of your Gerni can help ensure it works for longer and avoid a range of problems later on.
You can also find all cleaning and troubleshooting information in your Gerni manual!